Ecorend Render Systems

Ecorend QS1 Quick Set is a liquid accelerator solution for Monocouche through-coloured render systems to speed up the time to scrape during colder application periods.

Ecorend S10 Bonding Primer is a silicone resin based primer, specifically designed for use on masonry substrates. The fine particle size polymers within the product ensure deep penetration into the substrate, creating ultra high adhesion, whilst the silicone resin ensures that the primer matches the breathability of its subsequent topcoats. Coverage: Approx. 125m² per 25 Litres

↓ Scroll down to choose from available options. ↓

Used to give additional strength to thin coat renders and wherever two materials with different expansion coefficients meet.

For all types of old and new block and brick. G10 Multi-Surface Primer is specifically developed using fine particle polymers for ultra-high adhesion.

Ecorend OCR One Coat Base is a cement based, water repellent versatile basecoat that can be used as a scratch basecoat ready to receive a through coloured render, or as a flat finish ready to receive a thin coat render. The product can be applied in low temperatures by hand or spray and finished with a brush or sponge float. Coverage: Approx. 1.6kg per mm / per m2

ecorend P34 is a cement-based base coat that has been highly polymer-modified to offer improved adhesion, W2 waterproofing, and high breathability. It is suitable for use on multiple substrates and utilises our cutting-edge trowel technology, which makes the product easy to apply by hand or by spray. It can be used as a scratch base coat, ready to receive a through coloured render, or as a flat finish, ready to receive a thin coat render or paint finish. Coverage: Approx. 1.6kg per mm / per m2

Ecorend FX4 One Coat Base is a cement based basecoat that has been highly polymer modified in order to offer the ultimate flexible base for multiple substrates. Coverage: Approx. 1.7kg per mm / per m²

Ecorend K11 Key Coat Base is a cement-based, fibre-reinforced primer base coat developed to improve adhesion on suitable, difficult substrates before the application of a compatible Ecorend finish. Its highly polymer-modified formulation provides W2 water-repellent performance while remaining breathable. K11 can be applied by hand or suitable spray equipment and is commonly used as part of the Ecorend MR1 monocouche render system. Always confirm substrate preparation, reinforcement and application thickness against the current technical datasheet before use.

EcoRend X32 One Coat Base is a cement based basecoat that has been highly polymer modified in order to offer improved adhesion, waterproofing and breathability. Coverage: Approx. 1.7kg per mm / per m²

Ecorend BA3 Fast Set Bead Adhesive is a highly polymer modified product that provides excellent adhesion and instant grab for bedding of render profile beads onto masonary substrates. The products can be applied in low temperatures by hand to set plastic and stainless steel render beads prior to render application. Coverage: Approx. 80lm per pack.

ecorend HBR Monocouche Render One Coat is a cement-based, through-coloured render with Class A1 fire rating – developed for fast, efficient application across housing developments and other larger-scale projects. Water-repellent, breathable and designed to provide good adhesion, HBR can be applied by hand or spray to create a durable, low-maintenance decorative finish with a natural stone-like appearance.

Ecorend MR1 Monocouche Render is a high-performance, cement-based, through-coloured render designed to provide a decorative finish in one coat. Available in a wide range of colours, Ecorend MR1 monocouche combines a decorative finish and water-repellent performance within a single through-coloured render system. MR1 can be applied by hand or using suitable spray equipment and finished with a scraped texture. Supplied in 25kg bags, approximate coverage depends on the required application thickness and condition of the background. Scroll down to compare the available Ecorend MR1 colours.

↓ Scroll down to choose from available options. ↓

Ecorend SFP15 is a ready-to-use, colour-matched primer for preparing suitable backgrounds before the application of Ecorend SF15 Sil-Flex Thin-Coat Render. It regulates substrate suction and provides a consistent coloured base, helping prevent the underlying surface from showing through the completed textured finish.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Marble White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

Ecorend SF15 Sil-Flex is a ready-to-use, through-coloured thin-coat render formulated with silicone-acrylate resin. It creates a decorative 1.5mm textured finish while providing a flexible and weather-resistant final coat for suitable Ecorend render systems.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Marble White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

Ecorend SF10 1.0mm Sil-Flex Thin Coat Render is a silicone acrylate resin based, thin coat render that is highly flexible with excellent anti-crack properties. It is extremely weather resistant and comes ready to use with application by spray or hand. Developed using high performance silicone technology, this water repellent formulation provides long lasting façade protection.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Marble White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

Ecorend SP15 Silicone Primer is ready to use, a through-coloured primer for use prior to the SR15 Silicone Thin Coat Render topcoat. The product has been developed to be highly vapour permeable and to control the suction of the substrate, thus preventing any substrate grin through, and can be applied by brush, roller or spray.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Marble White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

Ecorend SR15 is a ready-to-use, through-coloured silicone thin coat render that creates a flexible 1.5mm textured finish. Its high-performance silicone technology provides excellent water repellence and vapour permeability while helping the completed surface resist cracking. Available in a wide choice of custom-tinted colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Marble White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

Eco Rend SR10 Silicone Thin Coat Render, is a ready to use, through coloured, flexible thin coat render mix. Developed using high performance silicone technology ensures that the finish is highly water repellent, highly vapour permeable and extremely flexible, giving the very best resistance to cracking.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Marble White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

A cutting edge waterproofing anti-bacterial nano liquid, which offers unique ultra-high waterproofing properties and anti-bacterial protection.

A powerful water based masonry wash containing carefully selected biocides effective against a broad range of bacterial, algal, fungal and mould species. Pack Size: 25 Litres. Coverage: Approx. 3m² per Litre.