Ecorend SF15 Sil-Flex Thin-Coat Render 25kg

Its water-repellent formulation helps protect the façade from weather exposure, while its flexibility reduces the risk of surface cracking associated with normal substrate movement. SF15 can be applied by hand or suitable spray equipment and finished with a plastic float to achieve an even textured appearance.

Before applying SF15, the prepared Ecorend base coat should be primed with colour-matched Ecorend SFP15 Sil-Flex Primer. This helps regulate suction and creates a consistent background for the selected render colour.

Product details:

• Product: Ecorend SF15 Sil-Flex
• Product type: Silicone-acrylate thin-coat render
• Grain size: 1.5mm
• Pack size: 25kg
• Coverage: Approximately 8–10m² per bucket
• Application: Hand or spray
• Finishing tool: Plastic float
• Required primer: Ecorend SFP15
• Suitable background: Appropriate Ecorend base coat
• Application temperature: 5°C to 25°C
• Maximum dilution: 5%

Apply only when the relative humidity will remain below 85% and the temperature within the recommended range for at least 24 hours. Follow the current Ecorend technical guidance for substrate preparation, drying times and application.

Approx Consumption

• 8-10m2 per tub.

Click here to visit the manufacturers website for technical information.

Substrate Primer
Ecorend SFP15 Sil-Flex Primer

Suitable Substrate
Appropriate Ecorend Basecoat

Pot Life
1 Hour +

Ready to Finish
10-40 minutes @ 5˚C - 25˚C

Humidity Requirement
Less than 85% for a minimum of 24 hours