Ecorend S10 Bonding Primer

APPLICATION TOOL
Brush, Roller or Spray

SUITABLE SUBSTRATE
Concrete, Clay, Lightweight Block and Brick

DILUTION RATE
Apply Neat 

DESCRIPTION
Ecorend S10 Bonding Primer is a silicone resin based primer, specifically designed for use on masonry substrates. The fine particle size polymers within the product ensure deep penetration into the substrate, creating ultra high adhesion, whilst the silicone resin ensures that the primer matches the breathability of its subsequent topcoats.

PREPARATION
New build - Remove all loose and flaking material from the substrate, (typically mortar snots or site contamination and algae growth). This should be removed with a power wash and by cleaning the surface with a hard bristle brush.

APPLICATION
Ecorend S10 Bonding Primer is applied neat as instructed above with a roller, brush or spray. STORAGE When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture. TOOL CLEANING All equipment must be washed with clean water immediately after use. Waste material should not be emptied into drainage systems