Ecorend TRX Nano Coat 25L

Pack Size
25L Bucket

Application Tool
Brush, Roller or Spray

Suitable Substrate
Render, Brick, Stone

Coverage
Approx. 0.1-0.2 litres per m2 (Dependent on substrate)

Application Temperature
5˚C - 25˚C

DESCRIPTION
A water based hydrophobic treatment used to provide additional long term waterproofi ng properties to external render and other masonry surfaces. It can help to prevent effl orescence and algae growth by keeping the substrate drier, TRX also provides increased resistance to dirt pick up and staining.

PREPARATION
All surfaces should be clean, reasonably dry and free from algae, lichen & other growths and grease. If there is evidence of organic growth, power wash to remove & apply EcoRend XR1 Fungicidal wash in accordance with instructions. TRX Nano Coat can take up to 7 days until full effects can be visible.

MIXING
TRX Nano Coat is supplied ready to use.

APPLICATION
TRX Nano Coat is best applied to the mineral substrate by the airless technique, undiluted and in the desired thickness. Brushes or lambskin roller may be used for smaller areas. Up to 0.1 - 0.2 litres/m² may be applied in one operation to vertical surfaces without loss of material. The exact amount depends on the absorbency of the substrate. Ensure that the substrate is fully saturated.

STORAGE
When stored unopened in a dry place at temperatures above 5°C, shelf life is 12 months from date of manufacture. TOOL CLEANING All equipment must be washed with clean water immediately after use. Waste material should not be emptied into drainage systems

HEALTH & SAFETY INSTRUCTIONS
This product contains a biocide for the protection of the cured product. Contains 2-OCTYL-2HISOTHIAZOL- 3-ONE. May produce an allergic reaction. For further information, please request the material safety data sheet for this product.