Sika Parex Base Coats

A pink coloured liquid with a high granular consistency for ease of application recognition, and to provide excellent bonding characteristics. MICRO GOBETIS 3000 is designed to control suction to high absorption or low porosity substrates and improves the adhesion for one coat render systems e.g. MONOREX GM* & MONOREX GF*, MONOBLANCO*, BLANC DU LITTORAL* etc, and the PAREXTHERM and PAREXDIRECT Render Systems. * Refer to the specific product data sheets.

A green coloured glass fibre mesh fabric combined with specially designed surface treatments that can be used in a wide range of PAREXTHERM and PAREXDIRECT render applications. For ease of identification the 355 AVU mesh is coloured green and has the ‘PAREX’ name and logo throughout the mesh.

MAITE MONOCOMPOSANT is a multi-purpose coloured, breathable and weatherproof mortar in powder form ready to mix with water. It is intended to be used in the PAREXTHERM Mineral render system, PAREXTHERM and PAREXDIRECT Acrylic render systems. It is suitable for use as an adhesive for bonding the insulations to the substrate and for creating a base coat with mesh.

A grey base coat/finishing coat and preparatory key coat render for variable and / or high or low suction substrates.

A restoration and bonding mortar for the renovation of old hydraulic cement or lime based renders, sound or cracked but not delaminated, including render or masonry that has been painted or has received a thick textured coating system. Only the addition of clean water on site is required. Designed to create a new base coat render suitable for taking a range of decorative finishes including: Decorative coatings, decorative top coat renders and finishes.

One-coat weather resistant grey render for internal and external walls. Suitable as a grey coat finishing render or as a base coat for receiving a decorative finish. e.g. MONOREX GM & GF, MONOBLANCO, & REVLANE.

Parex Render Bead Adhesive is based on new technology making it the first hybrid polymer grab adhesive especially created for the installation of external render beads, uniquely packed in a plastic 350ml cartridge.

A glass fibre mesh fabric combined with specially designed surface treatments that can be used in a wide range of Parex® cement and lime render applications. For ease of identification the TV10 mesh is coloured green and has the Parex® logo throughout the mesh. The TV10 mesh offers an effective, customised solution for the prevention of cracks that may form in render or reinforced layers of external masonry facades which are induced by construction techniques, construction materials or temperature changes. It can also be used for a wide range of repair applications. A high quality synthetic coating on the glass yarn protects the mesh against alkaline influences from the renders and base coat materials that are used.

SikaWall-1015 Adhesive Coat is a EWI adhesive coat which contains the optimal amount of polymer needed to adhere to insulation boards. This product has been specifically designed to receive Sika approved glass fibre reinforcing mesh. This product only requires the addition of clean potable water no other material should be added.

Monoaccel Plus is an admixture used to reduce the initial setting time of one-coat renders and other general mortars.

Admixture for key coat preparation to one coat renders, bonding and waterproofing.