Parex Revlane Taloche Gros: 1.5mm 25kg PG10 White Light

DESCRIPTION

Pre-mixed, vapour permeable, ready to apply Acrylic/Silicone-based decorative coating for external and internal walls. Finished appearance is based upon grain size.

• REVLANE+ finishes have enhanced fire proof properties to assist against the spread of flames.The surface of the coating hardens and does not soften again under heat.
• Excellent hiding power and flexibility
  characteristics.
• REVLANE+ finishes are water-vapour
  permeable. They do not create a vapour
  retarder.
• REVLANE+ TALOCHE FIN & TALOCHE GROS
  finishes can be spray applied but will give a
  different appearance to a hand applied
  application.

SUBSTRATES

(1) To assist against suction and to provide depth of colour the substrate may require an application of REVLANE+ REGULATEUR* first.

• In situ and pre-formed concrete: If required level the surface first with Parex base coat MAITE*.
• Base coats in accordance with BS EN 13914-1.
• MAITE* base coat.
• PAREX grey one-coat renders e.g. PARMUREX* smooth finish.
• PAREX coloured e.g. MONOREX GF* smooth finish.
• PAREXTHERM and PAREXDIRECT render systems.
• Internal walls, drylining, plaster.(gypsum) substrates: Prime the surface with REVLANE+REGULATUER*.
• Painted substrates: The existing paint must demonstrate adequate adhesion or be removed. Prime the surface with REVLANE+REGULATEUR*.
• PAREX decorative profiles.

UNSUITABLE FOR

• Exposed vertical substrates with a backward
  incline above 45° - a backward incline may
  affect water run off and may have a
  tendency to hold moisture.
• On PAREXTHERM Systems with exposed
  substrates sloping at more than 5° from
  vertical.

SUPPORTING PRODUCTS

• 
  REVLANE+ REGULATEUR - Substrate primer.
• 600 SEALER.
• PARAGUARD - lotus effect water/stain
  repellent.
• ACRYLIC TEXTURED FINISHES - provides
  guidance on the appearance of the finish.