Parex Sikawall 508 Monorex GM 25kg G10 White Light

Suitable for external masonry and concrete walls, White Light is applied as a decorative weatherproofing coat. Its W2-rated surface limits the absorption of liquid water while remaining permeable to water vapour.

Why use White Light?

• Pale G10 through-coloured finish
• Medium-grain appearance
• Suitable for modern and traditional façades
• Provides colour without exterior paint
• Weather resistant and breathable
• Can be used on many common masonry backgrounds
• Suitable for manual and machine application
• Offers scraped and spray-textured finishes
• Supplied in a 25kg bag

White Light can contrast effectively with darker windows, doors, roofing and façade trims. It can also provide a less pronounced alternative where the brightness of specialist Monoblanco is not required.

Use bags from the same production batch wherever possible and complete each elevation continuously to achieve a consistent pale finish.

Through coloured one-coat weather resistant and breathable decorating render for vertical masonry and concrete walls. 48 Standard colours available. Non standard colours are available subject to colour approval. Expected coverage 1.0m2 per 25kg.

SUITABLE SUBSTRATES
Masonry and walls conforming to BS 5628-3 and constructed from the following:
■ Concrete blocks.
■ Bricks.
■ Terracotta blocks e.g. Porotherm*.
■ Lightweight aircrete concrete blockwork e.g. Celcon.
■ Breeze blocks (clinker).
■ Stone/rubble stone.
■ Shuttered concrete.
■ Expanded clay insulation blocks.
■ Clean, sound, well adhered existing render.
■ Base coats conforming to BS EN 13914-1
■ PAREX grey weather resistant base coats,e.g. MONOGRIS E, PARMUREX or TRADIREX.
■ Dry-stacked inter-locking modular wall units e.g. Durisol* recycled timber blocks.*Consult masonry manufacturer’s datasheets. Durisol with Monorex GM & GF is NHBC approved for single skin external wall construction.
■ For below dpc applications and old substrates inaccordance with BS8000 - 4 Code of Practice for Waterproofing, consult Parex.

UNSUITABLE SUBSTRATES
■ Weak mortar or plaster (Gypsum) coated constructions.
■ Painted substrates - use PARINTER first
■ Avoid applications onto horizontal flat substrates or those with a backward incline as this may affect water run off and may have a tendency to hold moisture.

FINISHES
■ Medium Scraped - (GM) Fine Scraped (GF)
■ Sponge or Float Smoothed*
■ Trowel Smoothed
■ Spray Textured - from tyrolean to heavy roughcast effect