Parex Sikawall 508 Monorex GM 25kg G00 Natural White

Parex Monorex GM Natural White is a through-coloured, one-coat Parex render for external masonry and concrete walls. Its medium aggregate creates a defined scraped texture, while the G00 shade provides a light, neutral finish without requiring painting.

At a glance:

• Product: Monorex GM
• Shade: Natural White
• Colour reference: G00
• Grain size: Medium
• Composition: Cement, lime, sands, mineral pigments and admixtures
• Typical scraped thickness: 15mm for weatherproofing applications
• Approximate coverage: 1–1.1m² per bag at 15mm
• Application methods: Hand or spray machine
• Finish options: Scraped or spray textured
• Bag size: 25kg

This weather-resistant and breathable Parex render is suitable for new masonry and renovation work over compatible, properly prepared backgrounds. It can be applied directly to suitable brickwork, blockwork and concrete, or over an appropriate Parex base coat where required by the system specification.

Monorex GM is coloured throughout using mineral pigments, allowing the render to form the completed decorative surface without additional masonry paint. The Natural White G00 shade offers a softer alternative to a bright-white finish and should be checked using a physical sample before ordering.

Apply the render by hand or spray machine to create a medium scraped or spray-textured finish. At a typical finished thickness of 15mm, each 25kg bag covers approximately 1–1.1m².

SUITABLE SUBSTRATES
Masonry and walls conforming to BS 5628-3 and constructed from the following:
■ Concrete blocks.
■ Bricks.
■ Terracotta blocks e.g. Porotherm*.
■ Lightweight aircrete concrete blockwork e.g. Celcon.
■ Breeze blocks (clinker).
■ Stone/rubble stone.
■ Shuttered concrete.
■ Expanded clay insulation blocks.
■ Clean, sound, well adhered existing render.
■ Base coats conforming to BS EN 13914-1
■ PAREX grey weather resistant base coats,e.g. MONOGRIS E, PARMUREX or TRADIREX.
■ Dry-stacked inter-locking modular wall units e.g. Durisol* recycled timber blocks.*Consult masonry manufacturer’s datasheets. Durisol with Monorex GM & GF is NHBC approved for single skin external wall construction.
■ For below dpc applications and old substrates inaccordance with BS8000 - 4 Code of Practice for Waterproofing, consult Parex.

UNSUITABLE SUBSTRATES
■ Weak mortar or plaster (Gypsum) coated constructions.
■ Painted substrates - use PARINTER first
■ Avoid applications onto horizontal flat substrates or those with a backward incline as this may affect water run off and may have a tendency to hold moisture.

FINISHES
■ Medium Scraped - (GM) Fine Scraped (GF)
■ Sponge or Float Smoothed*
■ Trowel Smoothed
■ Spray Textured - from tyrolean to heavy roughcast effect