Parex Sikawall 508 Monorex GF 25kg B10 Moonscape

Moonscape can be applied to properly prepared concrete block, brick, terracotta block, lightweight aircrete and selected existing render or base coats. The condition and suction of the background must be assessed before work begins, with any required preparation completed in accordance with the render specification.

Why choose Monorex GF Moonscape?

• Fine-grain alternative to Monorex GM
• Moonscape colour
• Manufacturer colour code B10
• Creates a finer scraped texture
• Coloured throughout the render
• Suitable for weatherproofing external masonry
• Breathable decorative finish
• May be applied by hand or spray machine
• Suitable for new-build and renovation work
• Supplied in a 25kg bag

Alternative finishing techniques include spray texturing, trowel smoothing and sponge or float smoothing. The application method should be kept consistent across each continuous elevation to prevent unwanted differences in texture.

This is the only Monorex GF page within the affected set, making its fine-grain finish the most important point of distinction.

Parex Monorex GM is a through-coloured, one-coat, weather resistant and breathable decorating render for vertical masonry and concrete walls. 48 Standard colours available. Non standard colours are available subject to colour approval. Expected coverage 1.0m2 per 25kg.

SUITABLE SUBSTRATES
Masonry and walls conforming to BS 5628-3 and constructed from the following:
■ Concrete blocks.
■ Bricks.
■ Terracotta blocks e.g. Porotherm*.
■ Lightweight aircrete concrete blockwork e.g. Celcon.
■ Breeze blocks (clinker).
■ Stone/rubble stone.
■ Shuttered concrete.
■ Expanded clay insulation blocks.
■ Clean, sound, well adhered existing render.
■ Base coats conforming to BS EN 13914-1
■ PAREX grey weather resistant base coats,e.g. MONOGRIS E, PARMUREX or TRADIREX.
■ Dry-stacked inter-locking modular wall units e.g. Durisol* recycled timber blocks.*Consult masonry manufacturer’s datasheets. Durisol with Monorex GM & GF is NHBC approved for single skin external wall construction.
■ For below dpc applications and old substrates inaccordance with BS8000 - 4 Code of Practice for Waterproofing, consult Parex.

UNSUITABLE SUBSTRATES
■ Weak mortar or plaster (Gypsum) coated constructions.
■ Painted substrates - use PARINTER first
■ Avoid applications onto horizontal flat substrates or those with a backward incline as this may affect water run off and may have a tendency to hold moisture.

FINISHES
■ Medium Scraped - (GM) Fine Scraped (GF)
■ Sponge or Float Smoothed*
■ Trowel Smoothed
■ Spray Textured - from tyrolean to heavy roughcast effect