K Rend Silicone Render Systems

K1 Spray+ is one coat two pass through coloured render which provides a fine texture finish.

↓ Scroll down to choose from available options. ↓

K Rend Alkali Resistant Reinforcement Mesh provides high strength, good cohesion, excellent coating and is widely used to reinforce walls. This is a genuine K Rend product, beware of cheap imitations!

TC-Additiv is a solvent-free additive used to reduce the drying time of thin coat renders such as K Rend Silicone TC.

K Rend K Pro is a water based protective treatment designed to add water repellent properties to external render.

↓ Scroll down to choose from available options. ↓

K Rend R7 Acrylic is a modified Acrylic emulsion used to improve the adhesion of K Rend renders to difficult substrates, where the background does not provide sufficient key or has poor suction characteristics.

↓ Scroll down to choose from available options. ↓

K Rend Silicone K1 is a hand or machine applied through coloured render which is easy to apply and silicone enhanced, for greater levels of water repellancy. It provides a fine texture finish.

↓ Scroll down to choose from available options. ↓

Use the K Rend Accelerator to reduce drying time before scraping.

Algae Clean removes algae, mildew, fungus, and lichen.

K Rend HP12 is a high polymer base coat designed to provide enhanced performance on difficult substrates. The enhanced properties allow for increased water resistance and easier adhesion. This K Rend base coat can be applied either by hand or spray, though in some cases, the use of a scrim cloth may be required.

Offering a new and improved formula with reduced drying times and improved workability, GP Mix is a general purpose drymix rendering and masonry mortar requiring only the addition of water and mixing prior to use. It is designed to be used with brick and block as a masonry mortar, a rendering mortar (float coat) or as a bedding mortar for paving. When used as a render, GP Mix can be applied by hawk and trowel or through electric and diesel spray machines to receive a finish such as K Paint (Silicone Masonry Paint.)

K Rend HP14 base coat is a high polymer base designed to provide enhanced performance on difficult substrates. This cost effective solution is also used for its flexibility and high tensile strength on thin coat systems. It has increased water resistance and adhesion. It may be applied by hand or by spray and the use of scrim cloth may be required.

K Rend HPX Base offers extremely high performance render utilizing high polymer technology and fibres. It is used on unusual substrates requiring greater flexibility and adhesion. It may be hand or spray applied and usually requires the use of scrim cloth.

K Lime Coarse 413 can be used for building coarse stonework or for plastering and dubbing out irregular backgrounds.

K Lime Finishing 112 is designed for pointing, building dressed stone at a nominal joint thickness of 4-6mm. Can also be used internally.

K Lime SB1 is a Natural Hydraulic Lime based preparatory key coat which is used to improve the adhesion of K Lime renders to difficult substrates such as natural stone and brickwork. The product only requires the addition of water and thorough mixing prior to use.

K Lime Setting 213 can be used for pointing, building bricks, blocks, cutstone, and plastering at 8-10mm thickness. Setting 213 can be wood floated ready for painting or even used as bedding for natural stone floor tiles!

TC primer for thin coat renders. Tinted to all colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

K Rend R10 is a modified acrylic bonding coat designed to improve the adhesion of K Rend renders to difficult substrates, where the background does not provide sufficient key or has poor suction characteristics. R10 is a low odour, ready to use primer and is quick and easy to apply by roller or brush.

K Rend Standard UF base coat is a high, general purpose render, for use over medium density blockwork as a primary coat for K Rend finishes, and is applied by hand or spray.

K Rend TC15 Silicone is a thin coat, lightweight render with 1.5mm grain size, providing a true high-quality finish to your building. K Rend TC15 can be tinted to a variety of colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Pure White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.