K Rend Silicone Render Systems

K Rend Alkali Resistant Reinforcement Mesh provides high strength, good cohesion, excellent coating and is widely used to reinforce walls. This is a genuine K Rend product, beware of cheap imitations!

K Rend Standard UF base coat is a high, general purpose render, for use over medium density blockwork as a primary coat for K Rend finishes, and is applied by hand or spray.

K Rend HP12 is a high polymer base coat designed to provide enhanced performance on difficult substrates. The improved formulation delivers increased water resistance and strong adhesion, making it suitable for use on challenging backgrounds. This K Rend base coat can be applied either by hand or spray. In certain applications, the use of a scrim cloth may be required to reinforce the system.

K Rend HP14 base coat is a high polymer base designed to provide enhanced performance on difficult substrates. This cost effective solution is also used for its flexibility and high tensile strength on thin coat systems. It has increased water resistance and adhesion. It may be applied by hand or by spray and the use of scrim cloth may be required.

K Rend HPX Base offers extremely high performance render utilizing high polymer technology and fibres. It is used on unusual substrates requiring greater flexibility and adhesion. It may be hand or spray applied and usually requires the use of scrim cloth.

K Rend GP Mix 25kg is a premium external render mix suitable for float coats, scratch coats and masonry mortar applications. This render ready mix offers enhanced workability, reduced drying times and a smooth, consistent finish. Simply add water before application. Designed for use with brick and block, K Rend GP Mix can be applied by hand or through electric and diesel spray machines. It provides the same finished appearance as a traditional sand and cement render while delivering the consistency and reliability of a factory-produced mix.

K Rend R10 is a modified acrylic bonding coat designed to improve the adhesion of K Rend renders to difficult substrates, where the background does not provide sufficient key or has poor suction characteristics. R10 is a low odour, ready to use primer and is quick and easy to apply by roller or brush.

K1 Spray+ is one coat two pass through coloured render which provides a fine texture finish.

↓ Scroll down to choose from available options. ↓

K Rend Silicone K1 is a cement-based, through-coloured render for creating a fine-textured, low-maintenance finish on external walls. Enhanced with silicone technology, it repels rainwater while remaining breathable, allowing water vapour to pass through the finished render. Suitable for both new-build and refurbishment projects, Silicone K1 can be applied by hand or render spray machine. Depending on the substrate, it can be applied directly in two passes or used as a finish over a suitable K Rend base coat. It can produce either a scraped texture or roughcast finish and is available in 20 standard colours. Because the colour runs throughout the render, the finished surface does not require painting. Browse the available colours below or contact the Rendit team if you need help confirming the correct preparation and render system for your substrate.

↓ Scroll down to choose from available options. ↓

K Mono is designed for use with render spray machines. It acts as a one coat / one pass finish over most moderate to low strength block work, providing a labour-saving and cost-effective solution due to reduced application times.

↓ Scroll down to choose from available options. ↓

TC primer for thin coat renders. Tinted to all colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

K Rend TC15 Silicone is a thin coat, lightweight render with 1.5mm grain size, providing a true high-quality finish to your building. K Rend TC15 can be tinted to a variety of colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Pure White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

Thin coat lightweight render. Tinted to all colours. K Rend Silicone TC10 is a ready to use organic resin render which is applied to provide a low maintenance textured finish. It is designed to be used on a K Rend base coat and is available in a wide range of colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than Pure White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

TC-Additiv is a solvent-free additive used to reduce the drying time of thin coat renders such as K Rend Silicone TC.