Browse Products

K Rend HP12 is a high polymer base coat designed to provide enhanced performance on difficult substrates. The enhanced properties allow for increased water resistance and easier adhesion. This K Rend base coat can be applied either by hand or spray, though in some cases, the use of a scrim cloth may be required.

Offering a new and improved formula with reduced drying times and improved workability, GP Mix is a general purpose drymix rendering and masonry mortar requiring only the addition of water and mixing prior to use. It is designed to be used with brick and block as a masonry mortar, a rendering mortar (float coat) or as a bedding mortar for paving. When used as a render, GP Mix can be applied by hawk and trowel or through electric and diesel spray machines to receive a finish such as K Paint (Silicone Masonry Paint.)

K Rend HP14 base coat is a high polymer base designed to provide enhanced performance on difficult substrates. This cost effective solution is also used for its flexibility and high tensile strength on thin coat systems. It has increased water resistance and adhesion. It may be applied by hand or by spray and the use of scrim cloth may be required.

K Rend HPX Base offers extremely high performance render utilizing high polymer technology and fibres. It is used on unusual substrates requiring greater flexibility and adhesion. It may be hand or spray applied and usually requires the use of scrim cloth.

K Lime Coarse 413 can be used for building coarse stonework or for plastering and dubbing out irregular backgrounds.

K Lime Finishing 112 is designed for pointing, building dressed stone at a nominal joint thickness of 4-6mm. Can also be used internally.

K Lime SB1 is a Natural Hydraulic Lime based preparatory key coat which is used to improve the adhesion of K Lime renders to difficult substrates such as natural stone and brickwork. The product only requires the addition of water and thorough mixing prior to use.

K Lime Setting 213 can be used for pointing, building bricks, blocks, cutstone, and plastering at 8-10mm thickness. Setting 213 can be wood floated ready for painting or even used as bedding for natural stone floor tiles!

TC primer for thin coat renders. Tinted to all colours.

PLEASE NOTE: We will custom colour tint this product to your specification which means there may be a colour shade variance to the same product purchased elsewhere. If you are purchasing this item in any other colour than White to complete a project that's already been started we strongly advise purchasing this item from your original supplier to finish the works.

K Rend R10 is a modified acrylic bonding coat designed to improve the adhesion of K Rend renders to difficult substrates, where the background does not provide sufficient key or has poor suction characteristics. R10 is a low odour, ready to use primer and is quick and easy to apply by roller or brush.

K Rend Standard UF base coat is a high, general purpose render, for use over medium density blockwork as a primary coat for K Rend finishes, and is applied by hand or spray.

Top quality cotton twill with polythene inter-laminate, stops paints and liquids passing through.

Marshalltown 14" Gold Stainless Steel Blade PermaShape Finishing Trowel; maintains original broken in shape, DuraSoft handle.

Marshalltown 14" Spring Steel Blade Cement Finishing Trowel; hardened/tempered blade, lightweight and very strong, Shaped Wood handle.

Marshalltown 16" Spring Steel Blade Cement Finishing Trowel; hardened/tempered blade, lightweight and very strong, Straight Wood handle.

Marshalltown's PermaFlex trowel is a flexible plastering trowel ensuring a perfect finish every time. The high grade stainless steel blade is designed to flex for easier final smoothing and finishing of multi finish, skimming and board finish plasters.

Marshalltown 16" Gold Stainless Steel Blade PermaShape Finishing Trowel; maintains original broken in shape, DuraSoft handle.

Marshalltown's PermaFlex trowel is a flexible plastering trowel ensuring a perfect finish every time. The high grade stainless steel blade is designed to flex for easier final smoothing and finishing of multi finish, skimming and board finish plasters.

Marshalltown 13" Aluminium Hawk; DuraSoft handle, scored aluminium blade, callous preventer.

Marshalltown 14" Aluminium Hawk; DuraSoft handle, scored aluminium blade, callous preventer.