Close

K Rend Scraped Texture Finishes

K Rend scraped texture renders form an attractive range of one-coat applications, plastered directly onto blockwork. This type of application is suitable for ashlar cutting. They can also be used as a finish in conjunction with a K Rend Base Coat. To achieve the required finish, float to a level surface then scrape the entire surface evenly with a scraping tool when the render is set but not hard, removing 2mm to produce a uniform texture.

Click here to download K Rend digital brochure PDF.

Click here to order online.



Com Rend.

This hand applied, through coloured render provides a cost effective, and popular finish, without silicone properties. 

  • One Coat Coverage: 2.0kg / mm thick / sq m
  • Requires: 32-36kg / sq m approx for 16-18mm thickness.
  • Over Base Coat coverage: 2.0kg / mm thick / sq m
  • Requires: 20-24kg / sq m approx for 10-12mm thickness.


Silicone WP.

This hand applied, through coloured render is silicone enhanced, for greater levels of water repellancy. It provides a broken stone effect finish.

  • One coat coverage: 2.0kg / mm thick / sq m
  • Requires: 32-36kg / sq m approx for 16-18mm thickness.
  • Over Base Coat coverage: 2.0kg / mm thick / sq m
  • Requires: 20-24kg / sq m approx for 10-12mm thickness.


Silcone FT.

This render has the same properties of Silicone WP, but provides a fine texture finish.

  • One coat coverage: 2.0kg / mm thick / sq m
  • Requires: 32-36kg / sq m approx for 16-18mm thickness.
  • Over Base Coat coverage: 2.0kg / mm thick / sq m
  • Requires: 20-24kg / sq m approx for 10-12 mm thickness.


Spray Rend.

This render is designed for machine application but without silicone properties. Spray Rend provides labour saving application, with an attractive through coloured finish.

  • One coat coverage: 1.6kg / mm thick / sq m
  • Requires: 26-32kg / sq m approx for 16-20mm thickness.


Silicone Spray.

Another render designed for machine application, but with silicone properties. Spray renders are ideal for larger projects where the speed of machine application can offer time saving benefits. Silicone Spray is currently available in two grades- Silicone Spray for larger diesel machines or Silicone Spray grade E for smaller electric machines.

  • One coat coverage: 1.6kg / mm thick / sq m
  • Requires: 26-32kg / sq m approx for 16-20mm thickness.


Available Colours:


Technical Specification.

Scraped render on block or brick - 2 coat application.

Scraped render on block - 1 coat application.

Non-standard substrates e.g. Concrete, Cement Particle Board, Paint, Engineering Brick, Lightweight Block, Existing Render,etc - please seek technical advice.