Ready-to-use primer designed to adjust the base absorption of substrates prior to the application of Parex finishes.
A 100 per cent acrylic-based ready-to-use primer designed to adjust the base absorption of substrates prior to the application of Parex Parex DPR finishes including PAREXDIRECT Acrylic, PAREXTHERM Acrylic and the Advanced Masonry Simulation system. The primer is water – vapour permeable and is suitable for internal or exterior use.
- Apply 310 PRIMER using a woollen roller, brush or spray equipment.
- Allow to dry for 2 to 12 hours according to the temperature and the substrate, before applying topcoat finish.
- 310 PRIMER must be completely dry before any Parex finish is applied.
- One coat: 150 to 185m2 per bucket, approximately, depending on the method of application and surface to which it is applied.